Subject Link RPT-2010G-2F, Быстрое руководство по установке

Страница: 5 / 15

3
T
OP
V
IEW
This is the top view of the RPT-2010G-2F(-T)
containing the ground, power inputs, and
fault alarm relay.
LED I
NSTRUCTION
System LEDs
LED Color Status Description
PWR1 Green
On Power is supplied on the power input 1.
Off Power is not supplied on the power input 1.
PWR2 Green
On Power is supplied on the power input 2.
Off Power is not supplied on the power input 2.
Fault
Green
On The system boots up and in normal operation.
Off The system is powered off or during booting.
Red On The configured event of failure is triggered.
RM Green
On This device has the Ring Master.
Off The Ring Master is not on the device.
Ring Green
On The Ring protocol is enabled and works normally.
Flashing The Ring protocol is enabled, but works abnormally.
Off The Ring protocol is disabled.
Interface Status LEDs
LED Color Status Description
SFP Slot
P9 to P10
(1000M)
Green
On The 1000Mbps link of the fiber port is active.
Flashing Data is transmitted on the fiber port at 1000Mbps.
Off The 1000Mbps link of the fiber port is inactive.
LAN Port
P1 to P8
(1000M)
Green
On The 1000Mbps link of the port is active.
Flashing Data is transmitted on the port at 1000Mbps.
Off The 1000Mbps link of the port is inactive.
LAN Port
P1 to P8
(10/100M)
Amber
On The 10/100Mbps link of the port is active.
Flashing Data is transmitted on the port at 10/100Mbps.
Off The 10/100Mbps link of the port is inactive.