More user manuals on
– 29 –
Blower
housing
5-4-8 Blower housing
Install the blower housing
M8 x 55mm Flange bolt : 1pce.
M8 x 90mm Flange bolt : 3pcs.
Tightening torque : 18.0-20.0 N
・
m
180-200
kgf
・
cm
(13.3-14.8 ft
・
lbs)
NOTE: Insert the grommet (pulsar coil harness) and
recoil guide into the blower housing securely.
Flywheel
Recoil guide
Grommet
Pulsar coil
Pulsar coil harness
Tightening torque : 3.0-5.0
N
・
m
30-50
kgf
・
cm
(2.2-3.7
ft
・
lbs)
Place the pulsar coil wires along the groove of the
grommet and recoil guide to make it easier to assemble
the blower housing.
5-4-7 Pulsar coil and grommet
Tighten the bolt in place, making adjustments according
to
5-4-6
.
M6 x 8mm Flange bolt : 2pcs.
Caution : Do not forget to put the 2 pieces of pipe knock.
