Subaru Impreza, Руководство пользователя

Страница: 10 / 52

9
– CONTINUED –
press the push-button ignition switch.
NOTE
y
While pressing the select lever but-
ton in, the indicator on the push-button
ignition switch will not turn green even
when the select lever is in the “P” posi-
tion.
y
In case the engine does not start by
the normal engine start procedure,
move the select lever to the “P” posi-
tion, and switch the power to “ACC”.
Depress the brake pedal, and press the
push-button ignition switch for at least
15 seconds. The engine may start. Only
use this engine start procedure in case
of emergency.
y
When the engine is not running, the
brake pedal may feel stiff. In such a
case, depress the brake pedal more
forcefully than usual. Check that the
operation indicator on the push-button
ignition switch turns green, and press
the push-button ignition switch to start
the engine.
„
Stopping engine
1. Stop the vehicle completely.
2. Move the select lever to the “P” posi-
tion.
3. Press the push-button ignition switch.
The engine will stop, and the power will be
switched to “OFF”.
NOTE
Although you can stop the engine by
operating the push-button ignition
switch, do not stop the engine during
driving except in an emergency.
y
Do not touch the push-button ig-
nition switch during driving.
When the push-button ignition
switch is operated as follows, the
engine will stop.
– The switch is pressed and held
for 3 seconds or longer.
– The switch is pressed briefly 3
times or more in succession.
When the engine stops, the brake
booster will not function. A great-
er foot pressure will be required
on the brake pedal.
The power steering system will
not operate either. A greater force
will be required to steer, and it
may result in an accident.
y
If the engine stops during driving,
do not operate the push-button ig-
nition switch or open any of the
doors until the vehicle is stopped
in a safe location. It is dangerous
because the steering lock may be
activated. Stop the vehicle in a
safe location, and contact a
SUBARU dealer immediately.
y
Do not stop the engine while the
select lever is in a position other
than the “P” position.
y
If the engine is stopped while the
select lever is in a position other
than the “P” position, the power
will be in “ACC”. If the vehicle is
left in this condition, the battery
may be discharged.
B1301AE-A.fm 9 ページ ２０１６年８月２９日 月曜日 午前１０時４分