Vehicle Disassembly
4. Remove the Lower Dash Cover No.1.
•
Remove 1 Screw.
•
Disengage 8 Clips.
•
Disconnect Vehicle connectors.
5. Remove the Lower Dash Cover No.2.
•
Remove 1 Screw.
•
Disengage 8 Clips by pulling both the top and
bottom of the panel simultaneously.
1. Place the Vehicle in Park with the Parking Brake set.
2. Disconnect the Negative Battery Terminal.
•
Do not touch the Positive Battery Terminal with the
Negative Terminal.
•
Note the Battery Cable Position as it will be reinstalled
in the same position.
•
Wait at least 30 seconds after disconnecting the
Negative Battery Terminal before disconnecting the
Airbag Connector.
6. Remove the Driver’s Side Knee Airbag carefully.
•
Remove 2 Nuts.
•
Hold Airbag as to prevent tension on the Harness.
•
Disengage the Yellow Connector Lock by using a
pick tool to lift upward.
•
Use a Panel removal tool to carefully lift upward to
unplug the Airbag Connector.
3. Remove the Driver’s Side Dash Cover.
•
Disengage 4 Clips.
•
Wait at least 30 seconds after disconnecting the
Negative Battery Terminal before disconnecting the
Airbag Connector.
- 3 -
