―
10
―
* The volt meter voltage reading may be less than 110V AC depending on tester types.
* Output waveform is rectangular.
* When the battery voltage is low, the voltage of outlet may not maintain the rated 70V AC or more.
Outlet
①
Check that voltage* of Outlet is 70V AC
or more.
Start check procedure.
Connect positive then negative terminals of battery.
Turn i
gnition switch to "ON" position.
Yes
No
Complete check procedure.
Perform Troubleshooting A.
Temporari
O
y re-a
WWDFK
battery.
(Next page)
VOLT METER
8. CHECK THE OPERATION
CAUTION
Verify that all yellow (Air bag) connectors are connected firmly.
1. Check that all wiring and attaching points are correct.
2. Be careful not to pinch, strain, or crush wires during reassembly.
3. Be careful not to damage vehicle parts during reassembly.
1. POST-INSTALLATION CHECK
1. Use a volt meter to measure voltage. Strictly keep the volt meter set at range
of "250V AC or more" for measuring any power supply of 110V AC or more.
2. CHECK VOLTAGE
