Conventional Cruise Control
71
(2) Switch to Conventional Cruise Control.
Press and hold the
/
(following distance setting) switch for approximately 2
seconds or longer to switch from Adaptive Cruise Control to Conventional Cruise Control.
A buzzer sounds 1 short beep.
At this time, the following distance setting indicator on the EyeSight display area of the
combination meter display turns off and
(Conventional Cruise Control) is displayed.
To set the ready status:
Conventional Cruise Control can be set when
all of the following conditions are met and
is displayed on the EyeSight display
area.
- All doors (except the rear gate/trunk) are
closed.
- The driver’s seatbelt is fastened.
- The electronic parking brake is not
engaged (The brake system warning light
is turned off.).
- The select lever is in the
or
posi-
tion.
- The brake pedal is not depressed.
- EyeSight operation is not temporarily stopped.
⇒
- The road is not on a steep slope.
- The steering wheel has not been turned significantly in either direction.
- The X-mode is not turned on.
- The vehicle speed is between approximately 30 km/h and 145 km/h.
(3) Control the accelerator pedal to reach the desired speed.
S02446
S02450
S02451
D
M
B1302AE-A.book 71 ページ 2016年8月26日 金曜日 午後2時37分