Adaptive Cruise Control
40
(2) Setting Adaptive Cruise Control
Press the RES/SET switch to “SET/-” or
“RES/+”.
Adaptive Cruise Control is now set, and cruise
control will start.
If no vehicle in front has been detected, the
vehicle drives at the constant set target
speed.
When Adaptive Cruise Control is set, the set
speed is displayed and
changes from
white to green.
NOTE
The Adaptive Cruise Control can be set when the vehicle is stopped with the
driver depressing the brake pedal. The vehicle will start to be held in a
stationary position when the
(CRUISE) switch is pressed to set the
Adaptive Cruise Control.
NOTE
•
The target vehicle speed can be set between 30 km/h and 145 km/h.
•
If the vehicle speed is approximately 30 km/h or less when the vehicle
speed is set, the set vehicle speed is set to 30 km/h.
•
When driving on a curve, the vehicle may not accelerate, or may
decelerate, even if the set speed is higher than the current vehicle speed.
•
If
does not illuminate, even when the
(CRUISE) switch is
pressed, Adaptive Cruise Control will not operate.
•
If
does not illuminate and this occurs many times, even when the
(CRUISE) switch is pressed, there may be a malfunction in the
system. Contact a SUBARU dealer and have the system inspected.
S02441
S02442
(Green)
B1302AE-A.book 40 ページ 2016年8月26日 金曜日 午後2時37分