4
Temporally peel the liners of double-sided tape attached to the back of the air outlet garnish as shown in the figure
below.
Peel off all the release paper from Ⓐ.[Figure 4]
（4） Temporary peeling of the liners of double-sided tape
【Figure 4】
Insert the V-shaped part of the air outlet
garnish while aligning it with the projection of
the liner design. Align the bottom edge of the
garnish with the top edge of the paper pattern
and confirm that it is correctly positioned.
Also, check the position of the convex part.
（3）Temporary alignment of the air outlet garnish
【Figure 3】
Secure the release paper
(further than the convex part).
Release liner
Release liner
Release liner
Masking Tape
35mm
Convex
part
Masking Tape
Peel off all the
release paper.
LH
Ⓑ
Ⓑ
©
Ⓐ
Ⓐ
©
30mm
Top of paper pattern
Check the position
of the convex part.