Subaru AUDIO VIDEO & NAVIGATION SYSTEM, Руководство пользователя

Страница: 22 / 84

- 20 -
Operation
Setup of This Receiver
Setup of This Receiver
You can select the guide tone, illumination and
another useful functions of this receiver.
ATTENTION
The VTR function cannot be used.
■
Enable guide tone
Turn the “Guide tone” ON or OFF. If turned ON,
a guidance tone can be heard when you
operate a button.
(1) Hold down the [SRC] button for 1 or
more seconds.
Audio mode will be turned OFF.
(2) Hold down the [CTRL] button for 1 or
more seconds.
(3) Touch .
It turns ON and OFF each time you touch
. (Default is OFF.)
(4) Touch .
(5) Touch .
ATTENTION
• If the DISC is not removed within 15 seconds
after ejecting the DISC, a BEEP is sounded
regardless of whether this setting is ON or
OFF.
• A BEEP is sounded regardless of whether
this setting is ON or OFF when the audio
mode is set to OFF.
■
Enable AUX
Turn the “AUX setting” ON or OFF. It is
recommended that the AUX setting is left in the
“ON” setting. If it is ON, you can select source
from the AUX input.
(1) Hold down the [SRC] button for 1 or
more seconds.
Audio mode will be turned OFF.
(2) Hold down the [CTRL] button for 1 or
more seconds.
(3) Touch .
It turns ON and OFF each time you touch
. (Default is ON.)
(4) Touch .
(5) Touch .
■
Dim sub-display
If “Enabled”, the sub-display brightness
changes when you turn the car lights (side
marker light, tail light, and license plate light)
ON.
(1) Hold down the [SRC] button for 1 or
more seconds.
Audio mode will be turned OFF.
(2) Hold down the [CTRL] button for 1 or
more seconds.
(3) Touch .
It turns ON and OFF each time you touch
. (Default is ON.)
(4) Touch .
(5) Touch .
Enable guide tone
Enable guide tone
Next
Done
Enable AUX
Enable AUX
Next
Done
Dim sub-display
Dim sub-display
Next
Done