Subaru 2015 WRX STI, Руководство пользователя

Страница: 340 / 514

Charge the battery.
.
After the engine starts, the engine
speed will be kept high until the engine
has warmed up sufficiently.
1) Operation indicator
2) Push-button ignition switch
When the push-button ignition switch is
pressed while depressing the clutch pedal
(MT models)/brake pedal (CVT models),
the engine will start. The start procedure
of the engine is as follows.
!
MT models
1. Carry the access key, and sit in the
driver
’
s seat.
2. Apply the parking brake.
3. Shift the shift lever in neutral.
4. Depress the brake pedal.
5. Depress the clutch pedal until the
indicator on the push-button ignition
switch turns green.
6. While depressing the clutch pedal,
press the push-button ignition switch.
NOTE
In case the engine does not start by the
normal engine start procedure, move
the shift lever to the neutral position,
and switch the power to
“
ACC
”
. De-
press the clutch pedal, and press the
push-button ignition switch for at least
15 seconds. The engine may start. Only
use this engine start procedure in case
of emergency.
!
CVT models
1. Carry the access key, and sit in the
driver
’
s seat.
2. Apply the parking brake.
3. Shift the select lever in the
“
P
”
posi-
tion. The engine can also start when the
select lever is in the
“
N
”
position, however,
for safety reasons, start in the
“
P
”
position.
4. Depress the brake pedal until the
operation indicator on the push-button
ignition switch turns green. When starting
with the select lever in the
“
N
”
position, the
indicator does not turn green.
5. While depressing the brake pedal,
press the push-button ignition switch.
NOTE
.
While pressing the select lever but-
ton in, the indicator on the push-button
ignition switch will not turn green even
when the select lever is in the
“
P
”
position.
.
In case the engine does not start by
the normal engine start procedure,
move the select lever to the
“
P
”
posi-
tion, and switch the power to
“
ACC
”
.
Depress the brake pedal, and press the
push-button ignition switch for at least
15 seconds. The engine may start. Only
use this engine start procedure in case
of emergency.
.
When the engine is not started, the
brake pedal may feel stiff. In such a
case, depress the brake pedal more
forcefully than usual. Check that the
operation indicator on the push-button
ignition switch turns green, and press
the push-button ignition switch to start
the engine.
Starting and operating/Starting and stopping engine (models with push
–
button start system)
7-13
–
CONTINUED
–