Subaru 2012 Legacy, Руководство пользователя

Страница: 392 / 474

Black plate (401,1)
北 米
Model "A2480BE-A" EDITED: 2011/ 7/ 26
Drive belts
It is unnecessary to check the deflection of
the drive belt periodically because your
engine is equipped with an automatic belt
tension adjuster. However, replacement of
the belt should be done according to the
maintenance schedule in the
“
Warranty
and Maintenance Booklet
”
. Consult your
SUBARU dealer for replacement.
If the belt is loose, cracked or worn,
contact your SUBARU dealer.
Manual transmission oil
It is unnecessary to check the manual
transmission oil level. However, if neces-
sary, consult your SUBARU dealer for
inspection.
&
Recommended grade and
viscosity
Each oil manufacturer has its own base
oils and additives. Never use different
brands together. For details, refer to
“
Manual transmission, front differential
and rear differential gear oil
” F
12-7.
Automatic transmission fluid
&
Checking the fluid level
The automatic transmission fluid expands
largely as its temperature rises; the fluid
level differs according to fluid temperature.
Therefore, there are two different scales
for checking the level of hot fluid and cold
fluid on the level gauge.
Though the fluid level can be checked
without warming up the fluid on the
“
COLD
”
range, we recommend checking
the fluid level when the fluid is at operating
temperature.
!
Checking the fluid level when the
fluid is hot
Check the fluid level monthly.
1. Drive the vehicle several miles to raise
the temperature of the transmission fluid
up to normal operating temperature; 158
to 176
8
F (70 to 80
8
C) is normal.
2. Park the vehicle on a level surface and
set the parking brake.
3. First shift the select lever in each
position. Then shift it in the
“
P
”
position,
and run the engine at idling speed.
Maintenance and service
11-21
–
CONTINUED
–
11