Subaru 2012 Legacy, Руководство пользователя

Страница: 295 / 474

Black plate (302,1)
北 米
Model "A2480BE-A" EDITED: 2011/ 7/ 26
7-18
Starting and operating
than 5 seconds in any position
except the
“
N
”
or
“
P
”
position
when the brake is applied or
when chocks are used in the
wheels. This may cause the
transmission fluid to overheat.
.
Avoid shifting from one of the
forward driving positions into the
“
R
”
position or vice versa until
the vehicle has completely
stopped. Such shifting may
cause damage to the transmis-
sion.
.
When parking the vehicle, first
securely apply the parking brake
and then place the select lever in
the
“
P
”
position. Avoid parking
for a long time with the select
lever in any other position as
doing so could result in a dead
battery.
NOTE
.
For AT models, when the engine
coolant temperature is still low, the
transmission will upshift to higher
engine speeds than when the coolant
temperature is sufficiently high in order
to shorten the warm-up time and
improve driveability. The gearshift tim-
ing will automatically shift to the nor-
mal timing after the engine has warmed
up.
.
Immediately after transmission fluid
is replaced, you may feel that the
transmission operation is somewhat
unusual. This results from invalidation
of data which the on-board computer
has collected and stored in memory to
allow the transmission to shift at the
most appropriate times for the current
condition of your vehicle. Optimized
shifting will be restored as the vehicle
continues to be driven for a while.
.
When driving a vehicle that is
equipped with CVT under continuous
heavy load conditions such as towing a
camper or climbing a long, steep hill,
the engine speed or the vehicle speed
may automatically be reduced. This is
not a malfunction. This phenomenon
results from the engine control func-
tion maintaining the cooling perfor-
mance of the vehicle. The engine and
vehicle speed will return to a normal
speed when the engine is able to
maintain the optimum cooling perfor-
mance after the heavy load decreases.
Driving under a heavy load must be
performed with extreme care. Do not
try to pass a vehicle in front when
driving on an uphill slope while towing.
.
The continuously variable transmis-
sion is a chain type system that
provides superior transmission effi-
ciency for maximum fuel economy. At
times, depending on varying driving
conditions, a chain operating sound
may be heard that is characteristic of
this type of system.
&
Select lever
: With the brake pedal depressed, shift
while pressing the button in
: Shift while pressing the button in
: Shift without pressing the button
The select lever has four positions,
“
P
”
,
“
R
”
,
“
N
”
,
“
D
”
and also has a manual gate
for using the manual mode.
!
P (Park)
This position is for parking the vehicle and
starting the engine.