Subaru 2002 Forester, Руководство пользователя

Страница: 56 / 383

FORESTER (NA) A8050BE–A (ENG.)
1-28
HB1080BA
Make sure that the seatbelt is securely locked into place.
1. Set the child restraint system in the seating position.
2. Run the lap and shoulder belts through or around the child re-
straint system following the instructions provided by its manufacturer.
If the shoulder belt goes in front of the child’s face or neck, put it be-
hind the child restraint system.
3. Insert the tongue plate into the buckle.
4. Take up the slack in the lap belt.
5. Pull out the seatbelt fully from the retractor to change the retractor
over from the Emergency Locking Retractor(ELR) to the Automatic
Locking Retractor (ALR) function. Then, allow the belt to rewind into
the retractor. As the belt is rewinding, clicks will be heard which indi-
cate the retractor functions as ALR.
6. Before having a child sit in the child restraint system, move it back
and forth to check if it is firmly secured. Sometimes a child restraint
can be more firmly secured by pushing it down into the seat cushion
and then tightening the seatbelt.
7. Pull at the shoulder portion of the belt to confirm that it cannot be
pulled out (ALR properly functioning).
If the child restraint system requires a top tether, first remove the head
rest and then latch the hook onto the top tether anchor and tighten the
top tether. See the “Top tether anchorages” for additional instructions.