FORESTER U.S.A. (E)
2-38
J
SRS airbag system servicing
WARNING
D
When discarding an airbag module or scrapping the entire car
damaged by a collision, consult your SUBARU dealer.
D
The SRS airbag has no user-serviceable parts. Do not use
electrical test equipment on any circuit related to the SRS airbag
system. For required servicing of the SRS airbag, see your near-
est SUBARU dealer. Tampering with or disconnecting the sys-
tem’s wiring could result in accidental inflation of the SRS airbag
or could make the system inoperative, which may result in seri-
ous injury. The wiring harnesses of the SRS airbag system are
covered with yellow insulation and the system connectors are
yellow for easy identification.
CAUTION
If you need service or repair in areas listed below, we recommend
that you have an authorized SUBARU dealer perform the work. The
SRS airbag control module, impact sensors and airbag modules
are stored in these areas.
D
Under the center console
D
Inside each front fender
D
Steering wheel and column and nearby areas
D
Instrument panel and nearby areas
In the event that the SRS airbag is deployed, replacement of the sys-
tem should be performed only by an authorized SUBARU dealer.
When the components of the SRS airbag system are replaced, use
only genuine SUBARU parts.
To ensure their long-term reliability, the SRS airbags must be inspected
by a SUBARU dealer ten years after the date of manufacture, which is
shown on the certification label attached to the driver’s door.
