FORESTER U.S.A. (E)
1
Doors and locks
1-11
– CONTINUED –
This indicates that the system is in the Transmitter Programming
Mode.
Do not release the Programming button.
4. Press the “LOCK” button on the new transmitter. The door locks will
cycle once.
5. Repeat step 4 for any additional transmitters.
6. Exit the Transmitter Program Mode by releasing the Programming
button and turning the vehicle ignition off. Test all remote transmitters
to ensure that they work properly.
n
To delete a lost or stolen transmitter
1. Follow step 1 to 3 as described above.
2. Re-program the remaining transmitters as described in step 4.
D
If there is only one remaining transmitter, perform step 4
four
times
.
D
If there are two remaining transmitters, perform step 4
twice
for
each transmitter.
B
System maintenance
Your keyless entry system does not require any specific maintenance
except for occasionally changing the transmitter battery. The 12-volt
battery in the remote transmitter should last approximately one year,
depending on usage. When the battery begins to weaken, you will
notice a decrease in range, or the distance from your vehicle that the
remote transmitter will operate.
n
To change the remote transmitter battery
CAUTION
Do not let dust, oil or water get on or in the transmitter when
replacing the battery.
