Subal ND7100, Руководство пользователя

Страница: 6 / 36

INSERTING THE CAMERA
In order to facilitate the fitting of the camera into the housing, please take note for the following hints:
Open the housing as mentioned below and place the synch cable (hot shoe connector) over the edge
of the housing, pointing outwards.
Turn the power
ON/OFF switch on camera and housing to ON position.
Turn the focus coupler lever down to
AF position. This moves the crown wheel inside the housing
outwards and makes loading the camera into the housing easier, and is necessary in any case if a
zoom or focus gear is used on the lens.
Push the in/out control outwards (approx. 3 mm).