7
LED lamp LED 4 Stars
OPERATING INSTRUCTIONS
GB
– Never pull the mains cord out of the sock-
et by the cord, instead always take hold of
the mains plug.
– Never use the connector cord as a carry-
ing strap.
– If the mains cord of this device is dam-
aged, it must be replaced by the man-
ufacturer or its customer service
department or a person with similar quali-
fications in order to avoid risks.
– Render the device, which has outlived its
purpose, unusable. Pull the mains cord
out of the socket and cut the mains cord
in half.
WARNING
Danger to children and
other persons!
Children often do not recognise
the risks of handling electric appliances
or underestimate them. Children can be-
come trapped in the packing film when
playing and suffocate.
– Do not allow children to play with the
packing film and never allow them to use
electric appliances without supervision.
CAUTION
Fire hazard!
Do not use any sprays or the like
to clean the light.
– Do not cover the light head with cloths or
the like. The heat radiated from the light
could cause them to catch fire.
Notes on the place of installation
• Set up the light on a solid, level surface
(e. g. table or sideboard) close to a socket.
• Make sure that there is no risk of it tipping
and that the cord does not pose a trip
hazard.
Assembly with clamp
1. Insert the pin of the lamp arm into the
holder on the clamp.
2. Mount the lamp on a solid, hard, even
board with parallel surfaces.
3. Ensure that the clamp is sufficiently
secured.
Assembly with stand
1. Insert the pin of the light arm into the
holder on the base.
