6
Operation
3
Identifying the control panel
4
Using the main power button
□
The control panel is located on the top right corner of the
fireplace/heater unit.
□
The control panel contains the main power (1), flames
control (2) and heater control (3).
□
Press the power button (1) to turn the fireplace/heater unit on and
off. Press the power button (1) once to turn the unit on. Press again
to turn the unit off.
5
Using the Demo Mode
6
Using the heater control
□
For Use in Retail Store.
□
To turn Demo Mode on, press and hold the power button
(1) for 10 seconds. The log lights flash several times to
indicate that the Demo Mode is turned on. Demo Mode
deactivates the heater and all front control panel buttons
except the flame control button. To turn Demo Mode off,
press and hold the power button (1) for 10 seconds. This
fireplace is shipped with Demo Mode turned off for
normal customer usage.
□
Press the heater button (3) to turn ON or OFF the heat function.
□
If the heater is left on when the unit is turned off by the main power
button (1), then the heater will come on automatically when the unit
is turned back on. If the heater is off when the unit is turned off, then
the heater will remain off with the unit is turned back on. Note that
turning on the heater will require the flame lights to remain on at
high, medium, or low. - There is no adjustable thermostat for
controlling temperature settings in this unit.
7
Using the flame control
□
Press the flame button (2) to set the flames for different levels of flame brightness. You can control the flame brightness as the
table below:
Button Press
Flame Level
Fireplace Appearance
1st press
Medium
Flames Medium, Logs Glow Medium
2nd press
Low
Flames Low, Logs Glow Low
3rd press
All Off
Flames Off, Logs Off
4th press
High
Flames Highest, Logs Glow Highest
□
When the heater function turns on, the flame level will cycle through the 3 different level settings continuously.
Button Press
Flame Level
Fireplace Appearance
1st press
Medium
Flames Medium, Logs Glow Medium
2nd press
Low
Flames Low, Logs Glow Low
3rd press
High
Flames Highest, Logs Glow Highest
□
If the flame is off when the unit is turned off by the main power button, the flames will come on in highest mode when you turn
the heater on.
1
3
2
1
