17
HomeDepot.com
Please contact 1-877-527-0313 for further assistance.
Operation
Operation
3
4
Adjusting the Heater
NOTE:
To change between °F and °C press and hold the
Heater button on the control panel for 3 seconds.
Push the Power button to supply power to all
functions of the fireplace and put the insert in a
standby mode.
Push the Power button again to turn off all functions.
1
Powering the Fireplace
NOTE:
Holding the Power button on the control panel for
10 seconds will disable the heater function.
NOTE:
All previous settings are held in memory, so the
next time you power up the fireplace, the unit will turn on
with the same settings.
Pressing the Timer button will cycle through the timer
settings; 30 minutes, 1 Hour, 2H, 3H, 4H, 5H, 6H, 7H,
8H, 9H and off (00).
Setting the Timer
NOTE:
The control panel can be accessed at the upper-right corner of the insert.
The fireplace contains two infrared quartz heating elements.
The thermostat setting range is continuously ON or 82°F -
62°F(27°C - 17°C)
.
Set the heater to (00) to use the flame
effects without the heat.
The thermostat is adjustable by 2°F or 1°C increments.
Press the heater button on the control panel to turn on/off
(00) and adjust the heater setting.
The “+ / - ” buttons on the remote will increase / decrease
temperature setting.
2
Adjusting the Flame
There are 5 brightness levels that can be selected and OFF
(00) setting. Settings F5 - F1 decrease in brightness.
Pressing the Speed button on the remote to cycle through
flame speed setting.
Each flame color option has speed options available.
Setting S1 is slowest ranging up to setting S5 which is the
fastest.
5
Adjusting the Flame Speed
/
