- 9 -
KUBBE ATTACHMENT ASSEMBLY
When using the Kubbe Attachment:
• Do not use a cutting blade or a grinding plate.
• The meat must be prepared beforehand, prior to using the Kubbe
Attachment (See How to Grind Meat on page 6).
• You CANNOT grind unprocessed meat directly into the Kubbe
Attachment.
1. Insert the auger into the front part of the grinding head with the
short end of the auger facing out (Figure 9).When you insert the
auger, you may have to twist just a little until you feel it set into the
motor housing.
2. Insert the 1st part of the kubbe maker attachment on the front of
the grinding head (Figure 10).
3. Then insert the 2nd part of the kubbe maker attachment over the
1st part (Figure 11).
4. Screw the head locking cap onto the front of the grinding head
until it is snug (do not over-tighten) to hold the kubbe maker
attachment firmly in place (Figure 12).
Figure 9
Figure 10
Figure 11
Figure 12
Kubbe Attachment Assembly
