Page 8
The TCV Input/Output control
system is designed primarily for use with 24VDC systems. Follow all national and state elec-
trical codes and regulations when connecting peripheral devices to the TCV. Do
not exceed the voltages and amperages shown above.
Connect the wires from the peripheral devices to the TCV via the external 5-Pin
Connector. This connector has screw clamps for the wire for each pin.
3.5 Software Installation and Computer Connection
A compact disk packaged with each TCV contains the software required to program the unit.
The software must be installed and used to program the TCV before the unit is placed in ser-
vice.
This software will work on machines using the Windows XP Professional operating system.
Close all programs not necessary to computer operation before executing the installation pro-
cedure below.
1. Insert the Device Programmer compact disk into the compact disk drive on the computer
that will be used to control the settings on the TCV.
2. Use “My Computer” or “Windows Explorer” to open the compact disk drive containing the
compact disk.
3. When the files on the compact disk are displayed, double-click the left mouse button on
the “Setup” file. This will start an automated program installation and setup routine.
4. Follow the instructions displayed on screen to install the program.
5. Remove the compact disk and store in a safe location.
Содержание TCV
Страница 3: ......