StumpJumper EVO ALLOY, Руководство пользователя

Страница: 30 / 33

27
8. AIR SHOCK SETUP
When setting suspension, always set the shock first and fork second for air
pressure, rebound, then compression.
Make sure you are wearing all gear that would normally be worn on a ride
(shoes, helmet, hydration pack if used, etc.).
Please visit the suspension calculator tool at www.specialized.com. The
suspension calculator provides a personalized baseline suspension setup
recommendation based upon your specific height and weight. The baseline
information should be considered as a suspension setup starting point.
Adjust your suspension as needed based on your experience/preference and
terrain conditions.
8 . 1 . S E T T I N G A I R P R E S S U R E
„
Set the shock compression lever or knob to the full open or off position, and set the
rebound knob to the middle of the click range.
„
Attach a high-pressure shock pump to the air valve and set your shock pressure based on
the personalized baseline suspension setup from the suspension calculator.
B
A
8.1
SEAL
O-RING
Fig 8.1
„
To check the sag, push the o-ring against the seal (A), then mount the bicycle while
propped up against a wall and sit in the saddle in a normal riding position without bouncing
the suspension. Do not set sag while riding!
„
Check the sag by measuring the distance between the shock seal and the o-ring (B). Once
the sag is close to the desired setting, increase or decrease the pressure as needed in 5psi
increments until the desired sag is achieved.
Sag is measured as the distance between the o-ring and the shock body’s seal
after the rider’s weight has been applied to the bike with no bounce. When the
pressure is correctly set, sag should measure approximately 15.5 mm of stroke,
depending on rider experience/preference and terrain conditions. If the rider is
approaching 300lbs, sag may exceed the bike’s prescribed amount.
To equalize the air pressure, cycle the shock or fork any time after the air
pressure has been adjusted.
CAUTION: Do not exceed the shock manufacturer’s maximum pressure. Refer to
the shock manufacturer specifications for maximum shock pressures.
To set up the rest of your system, visit https://www.specialized.com/us/en/suspension-
calculator/app .