© STULZ Tecnivel – all rights reserved
EN/02.2021 Technical data subject to modifi cations
5
2. Transport/Storage
2.1
Delivery of units
The ClimaPac Compact unit is delivered packed with heat shrinkable plastic fi lm in separated modules
or completely assembled, as indicated in the unit drawing. If the unit is not delivered assembled,
modules must be joined together following the instructions of part
4. Assembly and installation
.
If you use a cutting tool (e.g. cutter) to remove the package, take care not to damage
the unit (scratching).
When delivery is accepted, check the unit against the consignment papers for
completeness and for external damage and record it on the consignment note in the
presence of the freight forwarder.
•
You receive the consignment papers with the delivery of the A/C unit.
•
The shipment is made ex works, in case of shipment damages, please assert your
claim towards the carrier.
2.2
Transport
Mortal danger by crushing.
A defective lifting device can lead to the uncontroler fall of the A/C unit.
Do not stay under suspended loads!
Service doors must always be closed during transport.
The ClimaPac unit can be moved by lifting devices with belts or ropes.
Lifting device can be attached to the lifting eyes mounted on the baseframe or to hoisting beams to
be inserted in the holes on the baseframe (not supplied by Stulz) as shown on the sketch below.
In order to ensure a safe craning of the units, instructions here below must be followed:
• Mount approriate shackles on the lifting lugs on the base frame.
• In case of thransport with hoisting beams, make sure they can bear the weight of the unit and place
them taking into account the mass centre of the unit.
• Use crossbeams with the appropriate width to prevent the sling to rub against the unit.
• With weatherproof units, make sure the protruding parts of the roof are not damaged by the lifting
gear.
• Do not lift any other loads together with the module/unit which is to be transported.
