![Stulz Air Booster 2 Скачать руководство пользователя страница 35](http://html1.mh-extra.com/html/stulz/air-booster-2/air-booster-2_operating-instructions-manual_1387347035.webp)
35
AIR BOOSTER 2
© STULZ SpA . – all rights reserved EN/10.2018/IT30I
INFORMATION
To ensure proper and safe disposal activities, operator must equip themselves with the
necessary PPE including: anti-cut gloves, oil resistant gloves, heat resistant gloves, safety
footwear, safety eye-wear against liquid and gas splashes.
The context in which the unit is located may require the use of additional PPE, thus it is mandatory
to inquire with the relevant staff of the area before starting operation.
Once the materials have been separated as shown below, they should be assigned EWC codes and
then sent for disposal in accordance with the national legislation.
Disposal related to the unit purchased occurs in three stages:
1. Disposal of packaging
The packaging of the unit must be disposed of ensuring separation of the following materials:
• Paper and Cardboard
• Wood Packing – Packing materials are not chemically treated unless they are declared to be
“fumigate”
• Plastic pallets – high- density polyethylene HDPE
• Plastic Film – polyethylene PE
• Polystyrene – expanded polystyrene EPS 6
2. Disposal at the end of life of the unit
The unit must be disposed of ensuring separation of the following materials:
• Metals
• Insulation and sound-absorbing materials
• Electric and electronic components
• Cables and wiring
• Plastic Parts – Plastic parts that are important in terms of weight are the following:
Identified Substance
CAS Number
acrylonitrile butadiene styrene terpolymer
9003-56-9
polystyrene homopolymer
9003-53-6
polycarbonatefrom bisphenol A
103598-77-2
12. Accessories
A grille is used in order to make the unit walkable. For the purpose of adaptation to the local
conditions, the grilles are available in two versions. The Light Duty version is more handy and the
airflow can be distributed over a larger area of the server rack front with the air conduction fins. The
Heavy Duty version is designed for a higher point load, and is preferable when the area in front of the
racks is for instance loaded by the wheels of transport trolleys.