Powerhouse 300
8
2:3 THE REAR PANEL
1
AC POWER ON SWITCH.
2
AC POWER INPUT.
3
LEFT & RIGHT INSERTS. The position of these insert points in the signal path is just before
the power amplifiers. Their main purpose is for the patching in the pre-amp/crossovers which
are supplied with some compact speaker systems. Effects can also be connected here if
required.
4
OUTPUTS. These XLRs are the amplifier outputs and connect directly to loudspeakers (min
impedance 4ohms).
5
COOLING FAN. This vent MUST NOT be obstructed while the POWERHOUSE is in use.
NOTE :
High voltages are present at the speaker outputs. Avoid touching exposed XLR pins and/or
jack plug tips.
Use only heavy duty speaker cables. Screened signal leads (guitar lead etc) are unsuitable
since they cannot safely withstand the high current.
Содержание Powerhouse 300
Страница 1: ......
