9
WARM / BRIGHT LED:
The Warm and Bright status LED’s indicate which FX Eq setting has been selected.
REGEN SWIT
CH AND ON LED:
Enables the regeneration control. This function is only available on delay setting.
When the green Status LED is illuminated, Regeneration is active.
REGEN:
This fader controls the amount of regeneration on a delay setting. A center detent is provided as typical
Starting position for ‘echo’ effects.
EFX TO EQ SWITCH:
Steps through four EQ option of Flat (off), bright, warm or warm + bright.
NOTE :
The effects processor has an overload indicator marked PEAK. If the PEAK LED flashes more than occasionally
the effect will distort. If this occurs turn down FX control knob on inputs channels. The FX fader controls the output of the
effects unit so will not prevent an overload.
Effect Type SEE DISPLAY
Aux send On/Off AUX MUTE + LED
Delay On/Off DELAY + LED
Effects processor On/Off FX + LED
Effects EQ setting WARM + BRIGHT LED’S
Regen On/Off REGEN + LED
Stand by On/Off S LED
STORING & RECALLING MEMORIES: (Only for Platinum MKIII) -
There are memory buttons numbered MEM
1-4, these provide a quick way to store & recall up to four different set-ups. For example, you might have one set-up with
a long, warm reverb for ballads, one with echo for your Elvis impressions, another with a shorter reverb for regular pop
songs and one with no effects for making announcements between songs.
To store the console settings as a memory
• Press one of the MEM (Memory) buttons, the LED will light
• For delay effects press the DELAY button, the DELAY LED will light.
• Select the effect using the EFX TYPE/DATA ENTRY control
• The effect number or delay time will display.
• Select Aux Mute, Regen, EFX, EFX EQ or Standby, the selected LED.
Press one of the MEM buttons, the LED will light.
• For delay effects press the DELAY button, the DELAY LED will light
• Select the effect using the EFX TYPE/DATA ENTRY control.
• The effect number and effect bank indicator will be dispalyed.
• Select Aux Mute, Regen, EFX, EFX EQ or standby, the selected LED’S will light.
• Press the MEM button again to store the settings and return to normal operation.
GETTING ST
ARTED WITH THE EFFECTS
• Connect a Microphone to an input channel.
• Press the FX button - check green LED Illuminates.
• Set FX fader to 0 dB.
• Turn FX knob on the input channel clockwise until you get desired effect level.
• Select the desired effect using FX TYPE button and DELAY button if required.
• If REGEN is required when using DELAY press REGEN button - check green LED illuminates.
• Adjust REGEN fader until required REGEN is achieved.
• If more adjustment is needed press FX EQ button.
REVERB ON SWIT
CH:
Switches the effects processor on or off. A green status LED indicates the effects are active.
EFX TO MON (Monitor) Control:
This fader controls the amount of effect added to the MON (monitor) mix. A center
detent is provided as a typical starting position.
39)
40)
41)
42)
43)
44)
45)
To recall the memory settings
• Press one of the MEM buttons, the LED will light
• This will now recall your stored set-up regardless of current console settings.
To overwrite a set-up, simply repeat the above procedure.
Содержание Platinum 12Fx
Страница 15: ...14 EFX Description...
