5
Step Five
Once dowels are in place and boards sit tight to the leg,
use metal corners (8) and M6 screws (10) to fix the
middle section to the leg.
Note! Turn the metal corner’s shorter edge downward
6
Step Six
7
Step Seven
Carefully lift the right leg on top of the middle section
To match leg holes with the dowels. Ensure that every dowel
lines up with its corresponding hole on the leg. Gently push
the leg down until the middle section seats together.
8
Step Eight
Fix middle section to the right leg using metal corners (8)
and M6 screws (10)
Note! Turn the metal corner’s shorter edge downward
Fix metal bar to the strengthening board using washers (16) and
M6 Screws (10). Holes are predefined.
9
Step Nine
Turn desk to a standing position. Fix
rack rails (13) to the legs and dividers
using M6 screws (10).
To fix rack
components to rack rails use screws
and cage nuts (16)
8
10
Put strengthening board (2) in place. Connect it
with the dowels from Step 5. Use metal corners
(8) and M6 screws (10) to fix the strengthening
board to the leg and wood screws (14) to fix
strengthening board to the cable management
