1
Step One
Insert dowels (12) into the holes as
shown in the illustration. Use a
rubber hammer if needed.
3
Step Three
Fix assembled parts together using
metal corners (8) and M6 screws (10)
as shown in the illustration.
8
10
11
4
Step Four
NOTE: Two people are required for the remainder of
assembly! Screw the desk tips (9) to the legs. Place the
assembled middle section onto the corresponding
holes on the left leg. Take special care to avoid
scratching the lacquered surface. Push the middle
section down until the dowels seat properly in their
respective holes. Use a rubber hammer, if needed.
2
Step Two
Assemble parts together as shown
in the illustration.
www.studiodesk.net
