Model 50/51 User Guide
Issue 6, September 2004
Studio Technologies, Inc.
Page 37
Dimensions (Overall):
19.0 inches wide (48.3cm)
1.72 inches high (4.4cm)
8.75 inches deep (22.2cm)
(1 standard rack space)
Mounting:
One space in a standard 19-inch-type rack
Weight:
8.9 pounds (4.1kg)
Model 51 Control Console
Power Requirements:
15Vdc filtered and regulated, 90mA maximum,
provided by Model 50 Central Controller
Connectors:
To Model 50 Central Controller:
5-pin DIN-type,
female
Remote Control:
¼
-inch, 3-conductor phone jack
Internal Microphone:
Type:
electret condenser
Frequency Response:
3dB roll off at 105Hz
Remote Control Contacts:
Connect normally open contacts to allow opera-
tion of remote talk to studio, remote control room
source select, and remote talk to headphones
functions
Dimensions (Overall):
7.4 inches wide (18.8cm)
2.6 inches high (6.6cm)
7.3 inches deep (18.5cm)
Mounting:
Desktop. Provision for stand mounting provided.
Weight:
2.5 pounds (1.1kg)
Model 35 Talent Amplifier
Power Requirements:
+20-32Vdc (modulated with left channel audio),
provided by Model 50 Central Controller
Power Present LED:
red, indicates presence of
operating power
Connectors:
Input (from Model 50):
3-pin XLR-type, female
Loop Thru:
3-pin XLR-type, male, connected in
parallel with input connector
Headphone Outputs:
2, ¼
-inch, 3-conductor
(stereo) phone jacks
Headphone Output:
1, feeds two headphone
jacks
Load:
intended for connection to one or two pairs
of headphones with total impedance of 75 ohms
or greater
Output Level:
user adjustable
Maximum Output Voltage:
16V peak-to-peak into
150 ohms @ 1% THD+Noise, 400Hz
Distortion (THD+N):
0.03%
Frequency Response:
20Hz-20kHz ±0.5dB
Dimensions (Overall):
4.2 inches wide (10.7cm)
2.0 inches high (5.1cm)
5.3 inches deep (13.5cm)
Mounting:
Desktop. Provision for stand mounting available
as option.
Weight:
0.8 pounds (0.4kg)
Model 38 Talent Amplifier
Power Requirements:
+20-32Vdc (modulated with left channel audio),
provided by Model 50 Central Controller
Power Present LED:
red, indicates presence of
operating power
Connectors:
Cue Mix Input (from Model 50):
3-pin XLR-type,
female
Cue Mix Input Loop Thru:
3-pin XLR-type male,
connected in parallel with input connector
Talent Input (Left In/Mono and Right In):
3-pin
XLR-type, female