Model 50/51 User Guide
Issue 6, September 2004
Studio Technologies, Inc.
Page 19
Model 70 Front Panel
Model 70 Back Panel
The Model 70 provides independent
left and right balanced outputs. Pin 1 is
shield, pin 2 is signal positive (+ or hot),
and pin 3 is signal negative (– or cold).
The electronically balanced outputs
have a nominal signal level of +4dBu
and are capable of driving loads of 600
ohms or greater.
The Model 70 can be used by itself, or
in conjunction with up to four Model 35
or Model 38 Talent Amplifiers. The loop
through connector on the Model 70 can
be used to connect to a Model 35 or 38
Talent Amplifier.
Configuration
Many StudioComm functions can be con-
figured to meet the exact needs of your
installation. Here’s an overview of what
you can configure:
•
–10dBV or +4dBu level for each input
•
Stereo or mono for each input
•
–10dBV or +4dBu level for the dub
output
•
Dim level
•
Auto dim off function
•
Studio source follows control room or
headphone source
