Studer Vista 5 M3 Скачать руководство пользователя

Страница: 44 / 564

Vista 5 M3 Digital Mixing System

2-4 Desk Operation

2.1 Vistonics

Operation / Local Views

[A]

[B]

[C]

[A]



Vistonics

Rotary Control Area

Each rotary control is grouped with a key to form a control element.

These control elements are sometimes used in a channel-related manner,

dedicating four of the control elements to each channel strip; sometimes,

neighboring channels are used in order to show a complete parameter

set of one single channel. This is the case when touching any graphical

display of EQ, dynamics, or pan, but also when activating

VIEW: MISC

VIEW: CHANNEL

[B]



Vistonics

Touch Screen Area

Graphical indication of dynamics, equalizer and pan. Touching the graphics

will open up all corresponding parameters on the rotary control area.

This section is also able to display bus assignment. Two modes are avail-

able: Bus assignment as a ‘bubble view’ to give an overview over the whole

console, or bus assignment of a specific channel (one per bay).

The graphical pan display may vary depending on the configured panning

function or format. (2-CH Stereo Pan, Multi-format Pan, VSP).

[C] Generic Display Area

This area is used to display all sorts of information. The following is continu-

ously displayed:

• Inherited label (top line). This corresponds to the USER label of the con

nected source (can be edited in the GC’s Global Patch window). This label

is normally changing between sessions (e.g. ‘Lead Vocal’).

• Switchable label (second line). Normally this is set to USER labels, but

might be changed by pressing

GLOBAL VIEW: LABEL TYPE

The displayed label toggles between showing: Channel number (also

referred to as Fixed Label, e.g. ‘Inp m 1’), USER label (also referred to as

Device Label, e.g. ‘Tascam Track 1’) – or it shows the label of the second

layer with its real time meter next to it (see

chapter 2.7.1.1

for details).

The last option is only available, if ‘Two Layer Mode’ is activated in the

graphic controller.

• Indication of channel type by color coding of the lower half as well as

writing the type in the bottom right corner.

The following information pops up when appropriate:

• Fader value in dB, when touched (or ‘held’ in dynamic automation mode)

• Graphical representation of current setting and previewed snapshot at the

same time.

• Snapshot filter mode of the fader. (TRIM or ISO). A solid yellow back

ground of the word ISO indicates that the whole channel is isolated from

snapshot recalls. In case the word is written only in yellow letters with

black background, this indicates that only parts of this channel are isolated

from snapshot recall.

• N–1 indication and bus number.

Touching the upper half (for input channels, multi-track input channels, multi-

track monitor channels): Opens the GC’s General Patch window, showing the

channel input

position of the selected channel..

Touching the lower half (for all channels): Opens the GC’s General Patch

window, showing the

direct output

position of the selected channel.

Document generated: 28.08.13

SW V4.9

Содержание Vista 5 M3





















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Vista 5 M3

Отзывы:

Похожие инструкции для Vista 5 M3

Бренды по названию

Популярные бренды

Studer Vista 5 M3, Руководство по эксплуатации

Результаты поиска

Содержание Vista 5 M3

Отзывы:

Похожие инструкции для Vista 5 M3

Бренды по названию

Популярные бренды