Studer D19m, Инструкция по эксплуатации, Страница: 86 / 100

D19m Technical Description
E72 D19m
Date printed:
30.06.20
c = 85 STEREO LINE 1/2 v = 0 Independent LINE 1/2
v = 1 - 127 STEREO LINE 1/2 Note 5
c = 86 STEREO LINE 3/4 v = 0 - 127 STEREO LINE 3/4
c = 91 REL.1-4 Pattern v = 0000xxx0 Relay 1 OFF
v = 0000xxx1 Relay 1 ON
v = 0000xx0x Relay 2 OFF
v = 0000xx1x Relay 2 ON
v = 0000x0xx Relay 3 OFF
v = 0000x1xx Relay 3 ON
v = 00000xxx Relay 4 OFF
v = 00001xxx Relay 4 ON
c = 92 REL.5-8 Pattern v = 0000yyyy Relay 5-8 ON/OFF
c = 93 OPTO 1-4 Req. v = 0 OPTO 1-4 Request
without sending Update
on next Change
v = 1 OPTO 1-4 Request
with sending Update on
next Change
c = 94 OPTO 5-8 Req. v = 0 - 1 OPTO 5-8 Request
c = 120 GAIN TEST v = 0 Gain test OFF Note 3
v = 1 Gain Test on Ch. 1
v = 2 Gain Test on Ch. 2
v = 3 Gain Test on Ch. 3
v = 4 Gain Test on Ch. 4
c = 121 SYSTEM RESET v = 0 Set Default val. Note 4
Note 1: Preamp related Parameters on MIDI ch. 1 - 15
Relay res. Opto 1-8 Pattern (c = 91,92 resp. 93,94) only on MIDI ch.
16
Note 2: Soft Clip ON/OFF common for all 4 Preamp channels
Note 3: Gain Test set to OFF on any other Control Change message
Note 4: Individual MP4RC System Reset if recognized on MIDI ch. 1 - 15
Global D19 Stagebox Reset (all MP4RCs) if recognized on MIDI ch.16
Note 5: If STEREO MIC or LINE LINK is active, all channel related parameters
on ch.1&2 resp. on ch.3&4 are controlled in parallel from ch.1 resp.
ch.3 except for the Sensitivity parameters. If STEREO MIC LINK is ON
and STEREO LINE LINK is OFF all channel related parameters including
MIC Sensitivity but excluding LINE Sensitivity are linked and vice
versa. Leaving the STEREO LINK Mode all channel settings on ch.2
resp. ch.4 must be restored to the state before the STEREO LINK was
active.