Studer D19m, Инструкция по эксплуатации, Страница: 75 / 100

D19m Technical Description
Date printed:
30.06.20
D19m E61
2.6 Miscellaneous Cards
2.6.1 D19m Sync Receiver
1.940.557
The sync receiver distributes an AES/EBU sync signal on the backplane and
is required if several cards are used in standalone mode, without a MADI or
a MADO card. This unit prevents that a separate sync signal must be wired
for each card.
2.6.2 Optical/Coax Interface
1.940.558
The Optical/Coax Interface is used for converting MADI signals from opti-
cal into electrical signals and vice versa. It is a Euro card unit normally used
for standalone application, e.g. in a 1U high ASC rack. For integration into
a system, additional information is required; please apply to Studer in such a
case.
It can be powered either with 5 V
DC
or a with variable supply voltage of
10...35 V
DC
, depending on the jumper setting.
10...35 V
DC
5 V
DC