30
32
Torque Bending Test
Description
Application
Non-destructive test method for studs welded with tip ignition (CD) and short cycle (SC) process.
Torque check of the welded studs for quality assurance.
STUD WELDING PRODUCTS, INC.
Check
us
out
on
the
in
Downey, CA
9459 Washburn Rd.
Downey, CA 90242
Phone- 800.252.1919
Fax- 562.862.3022
Hayward, CA
2391 American Ave.
Hayward, CA 94545
Phone- 510.782.7883
Fax- 510.782.7918
Kent, WA
19038 72nd Ave.
South Kent, WA 98032
Phone- 425.656.9787
Fax- 425.656.9786
Phoenix, AZ
3535 East Wier Ave., Ste. #4
Phoenix, AZ 85040
Phone- 602.305.9350
Fax- 602.305.4890
A bending torque is applied by a torsion meter onto the stud. This applies a defined stress in the welding zone.
The test torque parameters are shown in a table included in this test kit. You can edit the torque at the torque
meter by turning the set-up wheel (0-10Nm). Each parameter from the table belongs to the specified stud
diameter, the specified material and the sheet thickness of the work piece. These empirical parameters refer to
the limit between the elastic and the plastic deformation of the stud or the work piece. For a ratio stud diameter
to work piece thickness smaller than 1:2 a plastic deformation of the work piece will occur; for ratios larger than
1:2 the stud will fail.
With this tool you can make a fast and easy, non-destructive stud test. A quantitative check of the welding quality
in line to ISO 9000ff can be made.
Kit Contains:
1 torque meter
5 stud adapter (M3 to M8)
1 allen key 4 mm
1 parameter table
Torque Bending Test
Description
Application
Non-destructive test method for studs welded with tip ignition (CD) and short cycle (SC) process.
Torque check of the welded studs for quality assurance.
STUD WELDING PRODUCTS, INC.
Check
us
out
on
the
in
Downey, CA
9459 Washburn Rd.
Downey, CA 90242
Phone- 800.252.1919
Fax- 562.862.3022
Hayward, CA
2391 American Ave.
Hayward, CA 94545
Phone- 510.782.7883
Fax- 510.782.7918
Kent, WA
19038 72nd Ave.
South Kent, WA 98032
Phone- 425.656.9787
Fax- 425.656.9786
Phoenix, AZ
3535 East Wier Ave., Ste. #4
Phoenix, AZ 85040
Phone- 602.305.9350
Fax- 602.305.4890
A bending torque is applied by a torsion meter onto the stud. This applies a defined stress in the welding zone.
The test torque parameters are shown in a table included in this test kit. You can edit the torque at the torque
meter by turning the set-up wheel (0-10Nm). Each parameter from the table belongs to the specified stud
diameter, the specified material and the sheet thickness of the work piece. These empirical parameters refer to
the limit between the elastic and the plastic deformation of the stud or the work piece. For a ratio stud diameter
to work piece thickness smaller than 1:2 a plastic deformation of the work piece will occur; for ratios larger than
1:2 the stud will fail.
With this tool you can make a fast and easy, non-destructive stud test. A quantitative check of the welding quality
in line to ISO 9000ff can be made.
Kit Contains:
1 torque meter
5 stud adapter (M3 to M8)
1 allen key 4 mm
1 parameter table
Содержание StudPro 2500
Страница 22: ...22 23 CD Gun Exploded View...
