stud welding products StudPro 2500, Руководство по эксплуатации

Страница: 15 / 33

15 15
VOLTAGE SELECTION
Selecting the required weld voltage is achieved by turning the selector knob. The
voltage range is from 35VDC to 200VDC.
The voltage is determined by the diameter of the stud and the base material.
Approximate voltage staring points are listed below. Fine tuning the voltage to meet
your requirement for your specific application is recommended.
NOTE***when welding cupped‐head insulation pins, set the DC Voltage to 35 volts to
begin and increase as necessary. Adjust the spring pressure on the CD gun between
#1 and #3 as necessary.
SET-UP AND WELDING
Diameter Voltage (DC)
14 ga. 50‐75
12 ga. 75‐110
#8 110‐130
#10 125‐160
1/4” 160‐190
Diameter Voltage (DC)
14 ga. 35‐50
12 ga. 50‐75
#8 75‐100
#10 100‐120
1/4” 120‐140
MODEL TWE‐321 & 375
3/8”
(TWE‐375)
160‐200
5/16” 140‐160
Voltage Adjustment Knob
MODEL STUDPRO 2500
VOLTAGE SELECTION
Selecting the required weld voltage is achieved by turning the selector knob. The
voltage range is from 35VDC to 200VDC.
The voltage is determined by the diameter of the stud and the base material.
Approximate voltage staring points are listed below. Fine tuning the voltage to meet
your requirement for your specific application is recommended.
NOTE***when welding cupped‐head insulation pins, set the DC Voltage to 35 volts to
begin and increase as necessary. Adjust the spring pressure on the CD gun between
#1 and #3 as necessary.
SET-UP AND WELDING
Diameter Voltage (DC)
14 ga. 50‐75
12 ga. 75‐110
#8 110‐130
#10 125‐160
1/4” 160‐190
Diameter Voltage (DC)
14 ga. 35‐50
12 ga. 50‐75
#8 75‐100
#10 100‐120
1/4” 120‐140
MODEL TWE‐321 & 375
3/8”
(TWE‐375)
160‐200
5/16” 140‐160
Voltage Adjustment Knob
MODEL 3125 & 3750
(3750)
Voltage Adjustment Knob