Stübbe Series MDM 902, Оригинальное руководство по эксплуатации

Страница: 11 / 12

Troubleshooting
8 Troubleshooting
WARNING
Risk of injury and poisoning due to hazardous or hot
media.
Use personal protective equipment when carrying out any
work on the
fi tting.
Safely collect the media and dispose of it in accordance
with environmental regulations.
Consult with the manufacturer regarding faults which are not
identi
fi ed in the following table, or which cannot be traced to
the indicated causes.
Error Possible cause Corrective action
Incorrect
Measurement value Air bubbles in the transmitter
fl uid
Check that the fi tting is suf fi ciently fi lled with transmitter fl uid, top it
up if necessary ( → 5.3 Installing the fi tting, Page 7 ).
Medium in the
transmitter
fl uid
Defective separation
diaphragm Changing the separation diaphragm ( → 7.2.2 Changing the
separation diaphragm, Page 10).
Medium is leaking Defective seal Check the seal at the connection to the pipeline and replace it if
necessary
( → 5.4 Installing fi tting in pipe, Page 8 ).
Tab. 3 Troubleshooting
301 287 BA-2017.09.21 EN MDM 902 11