Stübbe ETLB-S series, Оригинальное руководство по эксплуатации

Страница: 25 / 33

Appendix
9 Appendix
9.1 Replacement parts
9.1.1 Part numbers and designations
Part no. Designation
161.01
1)
Housing cover
230.01 Impeller
260.01 Impeller cap
412.01 O-ring (sealing washer)
412.02 O-ring (shaft sleeve)
412.03 O-ring (impeller cap)
412.04 O-ring (connection)
412.05 O-ring (sealing washer)
444.01 Sealing washer
444.02 Sealing washer
490.01 Sealing À ange
490.02 Wafer type À ange
507.01 Splash ring (shaft sleeve)
509.01
Intermediate ring (sealing washer)
523.01 Shaft sleeve
531.01 Spring dowel sleeve (shaft sleeve)
550.01 Impeller washer
554.01 Washer (motor attachment)
554.02 Washer ( À ange attachment)
554.03 Washer (sealing washer)
558.01 Centrifugal disk (shaft sleeve)
713.01 Suspension pipe
730.01 Pipe connector (insert)
731.01 Pipe joint (gland nut)
801.01 Flange motor
901.01 Hexagonal screw ( À ange attachment)
902.01 Stud screw (motor attachment)
914.01 Hexagon socket-head screw
(cylinder screw) (impeller)
914.02 Hexagon socket-head screw
(cylinder screw) (motor attachment)
914.03 Hexagon socket-head screw
(cylinder screw) (sealing washer)
914.04 Hexagon socket-head screw
(cylinder screw) (intermediate
À ange)
920.01 Nut (motor attachment)
Part no. Designation
920.02 Nut (impeller)
934.01 Circlip (impeller)
940.01 Fitted key (impeller)
Tab. 7 Designation of components according
to part numbers
1) Not suitable for suction strainer or suction extension
301 356 BA-2018.01.25 EN ETLB-S, ETLB-ST 25