Stuart Turner monsoon extra Скачать руководство пользователя страница 1

INDEX ............................................... Page No

Application  . . . . . . . . . . . . . . . . . . . . . . . . 1

Storage  . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Typical Installation  . . . . . . . . . . . . . . . . . . 2

Pre-Installation Assembly  . . . . . . . . . . . . 2

Pump Location . . . . . . . . . . . . . . . . . . . . . 3

Pipework Connections  . . . . . . . . . . . . . . . 5

Pump Connections  . . . . . . . . . . . . . . . . . 7

INDEX ............................................... Page No

Electrical Installation  . . . . . . . . . . . . . . . . 10

Commissioning  . . . . . . . . . . . . . . . . . . . . 12

Maintenance  . . . . . . . . . . . . . . . . . . . . . . 14

Technical Specification  . . . . . . . . . . . . . . 16

Noise  . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Trouble Shooting Guide . . . . . . . . . . . . . . 17

Environment Protection  . . . . . . . . . . . . . . 19

Please leave this instruction booklet with the pump as it

contains maintenance and safety information.

Installation Instructions
For Monsoon Extra
Negative Single Duty Pump

Medium Pressure N1.3 bar

High Pressure  N2.4 bar

High Pressure N2.9 bar

High Pressure N3.7 bar

PRODUCT DESCRIPTION

Electric motor driven centrifugal pump complete with an automatic control system,

consisting of flow switch, pressure switch, pressure vessel and electronic control.

APPLICATION

The Single Negative Monsoon Extra range is designed for pressure boosting

applications in vented stored, hot or cold, clean water systems, where under gravity, no
flow is available.  Inlet pressures to the pump and ambient temperatures must not exceed
the values given in the technical specifications.

This pump set must not be used for any other application without the 
written consent of Stuart Turner Limited and in particular, must not be 
connected directly to the mains water supply.

This appliance is not intended for use by persons (including children) 
with reduced physical, sensory or mental capabilities, or lack of 
experience and knowledge, unless they have been given supervision 
or instruction concerning use of the appliance by a person responsible
for their safety.
Children should be supervised to ensure that they do not play with the
appliance.

STORAGE

If this product is not to be installed immediately on receipt, ensure that it is stored in a

dry, frost and vibration free location in its original packaging.

Содержание monsoon extra





















Отзывы: