Stuart Turner 46601 Скачать руководство пользователя страница 2

- 2 -

PRODUCT DESCRIPTION

Electric motor driven centrifugal pump complete with an automatic control system, 
consisting of flow switch, pressure switch, pressure vessel and electronic control.

APPLICATION

The Monsoon Extra Pressure Set (PS) range is designed for pressure boosting 
applications in vented, stored, cold clean water systems, where under gravity, no flow is 
available and can be used in systems where a negative head exists. 

 

 

Inlet pressures to the pump and ambient temperatures must not exceed the values 
given in the technical specifications.

 

This pump set must not be used for any other application without the    

 

written consent of Stuart Turner Limited.

 

This pump MUST NOT be connected directly to the mains water supply.

 

This appliance can be used by children aged from 8 years and above    

 

and persons with reduced physical, sensory or mental capabilities or    

 

lack of experience and knowledge if they have been given  

 

 

 

supervision or instruction concerning use of the appliance in a safe  

 

 

way and understand the hazards involved.  Children shall not play  

 

 

with the appliance.  Cleaning and user maintenance shall not be made   

 

by children without supervision.

 

Children should be supervised to ensure that they do not play with the   

 appliance.

 

This product should not be used for the supply of water to more than    

 

one dwelling (house, apartment, flat).

Please read installation details carefully as they are intended to ensure this product 
provides long, trouble free service.  Failure to install the unit in accordance with the 
installation instructions will lead to invalidation of the warranty.

STORAGE

If this product is not to be installed immediately on receipt, ensure that it is stored in a dry, 
frost and vibration free location in its original packaging.

CONTENTS 

Page

Checklist  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Important Facts - read before commencing installation  . . . . . . . . . . . . . . . . . . . . 4

Location   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Pump Connections  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Electrical Installation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Commissioning  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Maintenance  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Technical Specifi cation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Trouble Shooting   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Содержание 46601





















Отзывы: