STS Mars 1210 Скачать руководство пользователя страница 3

 

 

 
 
 
 
 
 
 
 
Every person involved with installation. operation and maintenance of this fixture has to   
- be qualified 
- follow the instruction of this manual 
- consider this manual to be part of the total product 
- Keep this manual for the entire service life of the product 
- pass this manual to every future owner or use of the product 
 

INTRODUCTION 

 
Thank you for choosing our fixture, if you follow up the instruction given in this manual we be sure that 
you will enjoy this product for a long period of time   

 

SAFETY INSTRUCTION 

 

 
 
 

 
 
 

This device has left our premises in absolutely perfect condition .In order to maintain this condition and 
to ensure a safe operation, it is absolutely necessary for the user to follow the safety instruction and 
warning notes written in this user manual. Important: Damages caused by the disregard of this user 
manual are not subject o warranty, the dealer will not accept liability for any resulting defects of problem. 
If the device had been exposed to drastic temperature fluctuation (e.g. after transportation),do not 
switch it on immediately. The arising condensation water might damage your device. Leave the device 
switched off until it had reached room temperature. Please make sure that there are no obvious 
transport damages, should you notice any damages on the AC connection cable or on the casing, do 
not take the device into operation and immediately consult your local dealer. 

 

The device falls under protection-class. The power plug must only be plugged into a protection class I 
outlet. The voltage and frequency must exactly be the same as stated on the device. Wrong voltages or 
power outlets can lead to the destruction of the device and mortal electrical shock.Always plug in the 
power plug last. The power plug must always be inserted without force .Make sure that the plug is tightly 

CAUTION! 

Be careful with your operations, With a dangerous voltage you can suffer a dangerous electric 

shock when touching the wires. 

CAUTION ! 

Keep this device away from rain and moisture 

Unplug mains lead before opening the housing 

For your own safety, please read this user manual carefully before you initially start-up 

Содержание Mars 1210










Отзывы: