STS M-750H, Руководство оператора

Страница: 45 / 72

45
Basic M-750 Hydraulic Periodic Maintenance Schedule ***
***Consult Your Hydraulic Power Source OEM manual(s) for a more detailed maintenance
schedule of your equipment.
STSI is not to be held liable for any discrepancies or errors in the schedule.
Maintenance Items
Hydraulic Components
Every 8 hours
(daily)
Every 50
hours
(weekly)
Every 100
hours
Every 200
hours
(monthly)
Every
400 hours
Every 2000
hours
(or yearly)
Check General Condition Visual (Temperature, Unusual
Noise or Vibrations, Cracks, Leaks, Loose hardware
0
Visual check of hoses and connections for oil leaks
0
Visual check of hoses for damage, wear, or kinks
0
Visual check of variable speed controller
0
Pump Components
Check General Condition Visual (Temperature, Unusual
Noise or Vibrations, Cracks, Leaks, Loose hardware.
0
Check & Fill grease cup for mechanical seal
0
Check pump mechanical seal for leakage (dripping)
0
Clean old grease build-up from inside of grease cup
0
Check front impeller clearance (wear plate)
0
Check rear impeller clearance (seal plate)
0
Inspect the check valve
0
Equipment Components
Wash out Jetting Tee
0
Remove & clean shear unit
0
General Condition Visual (Cracks, Leaks, Loose
hardware
0
Clamps are tight and safety pins installed
0
Lube valve stems
0
Clean reservoir tank of build-up (internal)
0
Disassemble and visually inspect piping (internal)
0