Operation and maintenance manual
Product code: DTP05 (Ex)
Product description: Corner Drum Depalletiser
BESPOKE HANDLING EQUIPMENT LTD
Technical Support Line: +44 (0)1736 851050
Removing drums from pallets:
•
Pump the hydraulic handle to raise the drum to the desired height.
•
Remove drum from the pallet by gently pulling the depalletiser away.
•
When clear of the pallet and transporting the drum, keep the drum as low to
the ground as is practical.
•
To place the drum down, simply turn the control lever anticlockwise locates
on the top of the lifter. The rate at which the drum lowers is controlled by the
amount that the lever is pulled.
•
Once the drum is placed on the floor (or another pallet), continue to lower
the rack until the catch goes slack, the operator can then reach forward and
manually remove the hook from the drum.
•
If the catch is lowered too much it is not possible to unhook the catch, in this
instance raise the rack slightly by pumping the handle, the catch will go slack
ready for unhooking.
