11 Operating Instructions: DTP05(-Ex)
Universal Drum Catch Variations
WARNING
–
DUE TO VARIATIONS IN THE MANUFACTURE OF DRUMS IT IS IMPORTANT THAT THE
CORRECT HOOK POSITION IS SELECTED. FAILURE TO DO SO COULD RESULT IN THE CATCH
DISCONNECTING FROM THE DRUM.
The universal drum catch has been designed so that a variety of
positions can be used to fit different sized drums. Changing the
hole that the top catch is located in increases the reach by a
further 10mm by each hole placement. The top hook must always
be placed in the shortest possible position. By removing the top
pin, the top hook can be turned over so that the sticker is upside
down. This gives the top hook a further 5mm of reach. Ensure that
the pin is reinserted and secured before lifting. If required, the
retractable support pad can be folded out to keep a drum in a
more vertical orientation.
The following hole positions are for guidance only, every drum should be assessed individually
and engaged with by following the instructions provided.
Top Hook Forward Reach Configuration Table
Catch (Original)
Catch (Flipped)
Back hole (4
th
)
0mm
+5mm
3
rd
hole
+10mm
+15mm
2
nd
hole
+20mm
+25mm
Front hole (1
st
)
+30mm
+35mm
