Figure 50
Instrument Bar
35
Tibial
Preparation
Figure 51
Drilling for Pegs
Drill Selection:
>
Drilling the tibial peg holes will facilitate seating the
implant .
>
Select the 1/8˝ Tibial Peg Drill (6541-2-625) .
>
Hold Tibial Peg Drill Template in position by applying
finger pressure to the template . Position 1/8˝ Tibial Peg
Drill through a peg hole perpendicular to the resected
tibia .
>
Drill through all four template holes using the 1/8˝ Tibial
Peg Drill taking care to ensure surgical glove and fingers
are not in contact with drill prior to drilling .
>
Drilling is complete when the drill stop has contacted the
template surface .
>
Carefully remove the Tibial Peg Drill Template from the
bone by lifting straight up and out of keel slot .
Tip: The central hole of the Tibial Drill Guide can be used
to facilitate removal of the guide straight up and out of the
keel slot .
1/8˝ Tibial Peg Drill (6541-2-625)
6541-4-801
Universal Driver
6541-2-625
1/8˝ Tibial Peg Drill
6541-2-64X – See Catalog
Tibial Peg Drill Template
Содержание Triathlon Tritanium
