Stryker SPY PHI HH9000, Руководство оператора

Страница: 80 / 112

74 4-0003045 Rev. G
The following image quality settings are user-configurable. For a more complete
description of these settings refer to
Appendix B .
Sharpening From 0 to 10 Larger values increase image
sharpening
Brightness From 0 to 255 Larger values increase image
brightness
Red Saturation From 0 to 1024 Larger values increase red saturation
—
red objects look more deeply red
Blue Saturation From 0 to 1024 Larger values increase blue
saturation
—blue objects look more
deeply blue
Peak / Mean Peak
Mean
Balanced Select Peak to set the brightness for
viewing small, foreground objects that
are closer to the front of the SPY-PHI
imager.
Select Mean to set the brightness by
weighting the adjustment more by the
mean brightness of the scene and less
by the brightest points.
Select Balanced to set the brightness
by balancing the Peak and Mean
settings.
To adjust an image quality setting, complete the following steps:
1. Press the Menu button on the front panel or select the VPI Options menu in
the Tools menu .
2. On the menu, select Image Quality.
3. Press the Up or Down arrow button to highlight the desired image setting.
4. Press the Right arrow button to select or the button to select.
5. Press the Up or Down arrow button to adjust the setting. The setting takes
effect immediately and is visible in the image.
6. Press the Right arrow button or the button to deselect when done.