Stryker Power-PRO XT, Руководство по обслуживанию

Страница: 53 / 186

C
D
E
F
G
F Fiig gu urre e 2 24 4 –– R Re em mo ovve e tth he e ssiid de erra aiill a asssse em mb bllyy
8. Reverse steps to reinstall. Use a rubber mallet to reinstall the outer rail bumper.
9. Verify proper operation before you return the product to service.
R Ra attcch he ett a asssse em mb bllyy rre ep plla acce em me en ntt ((X XP PS S o op pttiio on n))
T To oo ollss rre eq qu uiirre ed d::
• 3/32'' hex wrench
• 1/4'' hex wrench
• 3/16'' hex wrench
• Torque wrench (ft-lb)
P Prro occe ed du urre e::
1. Raise the product to the highest height position.
2. Raise the siderail to the up and locked position.
3. Using a 3/32" hex wrench, remove the two screws (A) that secure the ratchet cover (B) to the ratchet assembly. Remove
the cover (Figure 25).
4. Using a 1/4" hex wrench, remove the socket head cap screws (C) that secure the siderail clamp (D) to the ratchet
assembly at the foot end of the main assembly (Figure 25). When you reinstall, use a torque wrench to torque both new
screws to 22 ± 3.3 ft-lb.
5. Using a 3/16" hex wrench, remove the four screws (E) that secure the ratchet assembly (F) to the overmold assembly
and discard. Remove the ratchet assembly (Figure 25). When you reinstall, use a torque wrench to torque the four new
screws to 9.5 ± 1.5 ft-lb.
6506-109-002 Rev G.1 47 EN