manualshive.com logo in svg

Stryker Power-PRO XT 6500, Руководство по эксплуатации и обслуживанию


Поделиться
Скачать
background image

18

6500-509-001 REV B

www.stryker.com

Return To Table of Contents

Summary of Safety Precautions

NOTE

•  Loose items or debris on the patient compartment floor can interfere with the operation of the safety hook and cot 

fastener.  Keep the patient compartment floor clear.

•  This manual should be considered a permanent part of the cot and should remain with the product even if the cot 

is subsequently sold.

•  Stryker continually seeks advancements in product design and quality.  Therefore, while this manual contains the 

most current product information available at the time of printing, there may be minor discrepancies between your 
cot and this manual.  If you have any questions, please contact Stryker Customer Service or Technical Support 
at (800) 327-0770 or (269) 324-6500.

•  Adjustment of the rail clamp assembly may be required in order to compensate for any variation in the cot retaining 

post position depending on the cot manufacturer and model number.   

•  When replacing an existing safety hook with a new style, adjust the mounting location to maintain the proper 

position of the safety hook face.

•  Stryker recommends that, prior to installation, the certified mechanic plan the placement of the safety hook in the 

rear of the vehicle.

•  If the extend (+) button on the control switch remains activated after reaching the set load height, the motor will 

remain halted until the operator releases the button.  Once the button is released, press the extend (+) button 
again to “jog” the cot height up further.

•  The operators must lift the cot weight slightly off of the wheels to use the manual extend or retract while a patient 

is on the cot. 

•  Activation of the manual back-up release handle may cause the cot to lower slowly if less than 40 pounds (18 kg) 

are on the cot.

•  Hydraulic fluid will become more viscous when the cot is used for extended periods in cold temperatures. When 

using the manual back-up release function to extend the base during unloading in cold weather conditions, hold 
the release handle for approximately one second after the cot wheels touch the ground to minimize sagging of the 
litter as the cot is removed from the ambulance.

•  When operating the manual back-up release handle, avoid rapid lifting or lowering of the base or movement may 

appear sluggish; lift with a slow constant motion.

•  Batteries slowly lose power when not on the charger.
•  Inspect the straps and clips for wear between use and replace the strap if it is no longer holding the oxygen bottle.
•  The kickstand assembly is configured for an X-frame cot retention system only. 
•  The kickstand (p/n 6085-002-000) is not compatible with the optional base storage net (p/n 6500-160-000).
•  These are general instructions for installation of the Pedi-Mate®. Safe and proper use of the Pedi-Mate® is solely 

at the discretion of the user. Stryker recommends that all users be trained on the proper use of the Pedi-Mate® 
before using it in an actual situation.  Retain these instructions for future reference. Include them with the product 
in the event of transfer to new users.

•  Failure to follow the cleaning directions when using the specified types of cleaners may void this product’s 

warranty (see 

page 169

).

•  If the arrow on the bottom bracket of the retaining post points toward the head end of the cot, the retaining post is 

set for an X-frame style cot. If the arrow points toward the foot end of the cot the post is set for an H-frame style 
cot. 

Содержание Power-PRO XT 6500













































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Power-PRO XT 6500

Bard PowerGlide Patient Manual preview
PowerGlide
Бренд: Bard Страницы: 36
Bard Excalibur Instructions For Use preview
Excalibur
Бренд: Bard Страницы: 2
Bard Site-Rite 5 Technical Manual preview
Site-Rite 5
Бренд: Bard Страницы: 30
Bard Peripheral Vascular True Instructions For Use Manual preview
True
Бренд: Bard Peripheral Vascular Страницы: 44
Tabi Aura Installation Instructions Manual preview
Aura
Бренд: Tabi Страницы: 8
Dabi Atlante EAGLE 3D Owner'S Manual preview
EAGLE 3D
Бренд: Dabi Atlante Страницы: 102
Harman Martin ERA 800 Performance Safety And Installation Manual preview
Martin ERA 800 Performance
Бренд: Harman Страницы: 32
Harman Martin ERA 600 Performance Safety And Installation Manual preview
Martin ERA 600 Performance
Бренд: Harman Страницы: 32
Hardt INFERNO 4500 Operation Manual preview
INFERNO 4500
Бренд: Hardt Страницы: 22
Sabre PA-100 Quick Start Manual preview
PA-100
Бренд: Sabre Страницы: 2
K-LASER Blue Derma Operating Instruction preview
Blue Derma
Бренд: K-LASER Страницы: 70
K-LASER Blue Dental Operating Instruction preview
Blue Dental
Бренд: K-LASER Страницы: 72
Rain Harvesting Air Gap Installation And Specification Manual preview
Air Gap
Бренд: Rain Harvesting Страницы: 2
Haas TR Series Installation Manual preview
TR Series
Бренд: Haas Страницы: 12
SaMASZ Spin Operator'S Manual preview
Spin
Бренд: SaMASZ Страницы: 25
Waterpik WP-800 Series Quick Start Manual preview
WP-800 Series
Бренд: Waterpik Страницы: 2
Zero88 Frog Operating Manual preview
Frog
Бренд: Zero88 Страницы: 26
HAMOKI HC-1 Instruction Manual preview
HC-1
Бренд: HAMOKI Страницы: 7

Бренды по названию

Популярные бренды

Загрузить еще бренды