manualshive.com logo in svg

Stryker Crossfire, Руководство пользователя, Страница: 10 / 48

Поделиться
Скачать
Stryker Crossfire Скачать руководство пользователя страница 10

EN-8

Indications/Contraindications

The Crossfire™ system is 

indicated

 for use in orthopedic and arthroscopic 

procedures for the knee, shoulder, ankle, elbow, wrist, and hip. The Crossfire™ 

System provides abrasion, resection, debridement, and removal of bone and soft 

tissue through its shaver blade, and the ablation and coagulation of soft tissue, as 

well as hemostasis of blood vessels, through its electrosurgical probe. 
Examples of uses of the product include resection, ablation, and coagulation of 

torn knee cartilage, subacromial decompression, and resection of synovial tissue 

in other joints.
The electrosurgical probe is 

contraindicated

 for use in procedures where a 

nonconductive irrigant is used or with patients having cardiac pacemakers or 

other electronic implants.

Package Contents

Carefully unpack the Crossfire™ console and inspect each of the following 

components. Report any damaged components to Stryker. 

(1)

Crossfire™ console 

(1)

Hospital-grade power cord (0105-003-001)

(1)

User guide

Available Accessories

The Crossfire™ system is compatible with the following accessories:

0475-000-100

Crossfire™ Footswitch

0279-xxx-xxx

SERFAS™ Energy family of electrosurgical probes 

0375-708-500

Formula® 180 Handpiece

0375-704-500

Formula® Handpiece (with buttons)

0375-701-500

Formula® Handpiece (without buttons)

0275-601-500

Small-Joint Shaver Handpiece

0277-200-100

iSWITCH™ Universal Wireless Footswitch Receiver

0277-100-100

iSWITCH™ Universal Wireless Footswitch

6000-001-020

Stryker firewire cable

Note: Instructions for use can be found in the following manuals:

Crossfire™ Console:  

1000-401-036 (English) or P11344 (international)

Crossfire™ Footswitch:  

1000-401-032 (English) or P11345 (international)

Содержание Crossfire

















































Отзывы:

Нет отзывов