manualshive.com logo in svg

Stryker Atlas 660Z, Руководство по обслуживанию

Поделиться
Скачать
Stryker Atlas 660Z Скачать руководство пользователя страница 9

660 Zoom Stretcher 0660

−

009

−

002 REV 

E

page 1

−

4

Set−Up Procedures

It is important that the Model 660Z Stretcher is working properly before it is put into service.  The following

list will help ensure that each part of the unit is checked.

S

Plug the power cord into a properly grounded, hospital grade wall receptacle.  The 12 volt batteries that

provide power to the drive wheel and back

−

up power to the unit functions will charge whenever the power

cord is plugged into the wall socket.  The batteries require approximately 6 hours of charging time before

the stretcher is put into service.

  WARNING

The Model 660Z Stretcher is equipped with a hospital grade plug for protection against shock hazard.  It must

be plugged directly into a properly grounded three

−

prong receptacle.  Grounding reliability can be achieved

only when a hospital grade receptacle is used.

S

Depress the pedal at either end of the stretcher fully to set the four wheel brakes and verify all four casters

are locked.

S

Ensure the siderails raise and lower smoothly and lock securely in the full up position.

S

Run through the operation of the drive wheel to ensure it is operating properly.

Содержание Atlas 660Z









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды