Unpacking and Initial Set–Up Procedures
3
UNPACKING INSTRUCTIONS
Refer to unpacking instructions located on outside of marked crate.
SET–UP PROCEDURES
It is important that the Stryker Adel 2100 Childbearing Bed is working properly before it is put into service.
The following list will help assure that each part of the bed is tested.
S
Plug the bed into a properly grounded, hospital grade wall receptacle.
WARNING
The 2100 is equipped with a hospital grade plug for protection against shock hazard. It must be plugged di-
rectly into a properly grounded three–prong receptacle. Grounding reliability can be achieved only when a
hospital grade receptacle is used.
S
Assure the siderails raise and lower smoothly and lock in the up position.
S
Assure that the brakes hold when the brake pedal is engaged.
S
Run through each function on the hand pendant to assure that each function is working properly.
Beds equipped with nurse communication siderail control option only:
S
Plug the interface cable into the 37 pin connector in the litter frame at the head end of the bed, and
into the ”Patient Station”, ”Head Wall”, ”Docker Station”, or equivalent (whichever applies).
S
Run through each function on the siderail control panels to assure that each function is working prop-
erly.
